You are here:   User Profile
Register   |  Login

My Profile

   Minimize
Profile Avatar
ColeBatey750
Vadsteinsvikveien 113
Frei, NA 6520
Norway
458 84 643 http://www.backupusb.com/ *******
Disadvantages of the firmware: The remote control board setting key cannot be used, and the remote control board cannot be used to boot, and the mt7601 network card box cannot connect to WiFi (my box is the mt7601 network card version and there is no excessive box test). \u0026nbsp; This note should be applicable to Q5 devices in all regions. It describes the process in detail and provides it to those who need it. I am Guizhou Mobile. There are not so many equipments for testing. Please test it yourself in other areas. I am not responsible for the consequences. Brush is risky, and brush and cherish.

First, the preparation 1. Need tools: TTL line (recommended to buy CH340G models, more secure), U disk, USB male to male line; 2. Download Brush Wizard, Es File Manager software, putty software, TTL driver package, Burning_Tool flashing tool software, firmware (net disk there rtl8189, mt7601, rtl8188e three network adapters, multiple desktop versions, please note that choose to download, in theory, firmware support Zhejiang Mobile, Jiangsu Mobile, Guizhou Mobile original remote control). Backup box system method: 1. Prepare TTL line, U disk (formatted as FAT32 file system), putty software, TTL driver package.

2. Lightly open the box, wiring; box wiring method, directly look at the back of the back, GND then GND, RX then TX, TX then RX;

3. Install TTL line driver, we directly install the TTL model to find the corresponding driver to install (this tutorial link has provided CH340G usb to ttl driver support win7 driver); 4. Right-click my computer - properties - equipment Manager - Port - COM \u0026quot;X\u0026quot; (X is the last digit) - Properties - port settings - changed to '115200' - OK;

5 open putty, according to the order of the figure can be set, COM behind the number in accordance with their own computer digital input, set the completion of choice open, then the set-top box power on the box, this time putty will start running code (if not running code Align the RX and TX of the TTL line on the STB);

6. Back up the box system: After running the code, press the Enter key on the keyboard, enter the following command and press Enter. Dd if=/dev/block/mmcblk0pX of=/mnt/sda/sda1/system.img Description: if=original path of=target disk path+file name.

If the backup is successful, there will be a system.img file in the root directory of the U disk, about 600 M, backed up to the computer for future recovery. Backup remote code method: Install the Flash Wizard, click the Utility page, click the ADB command line button, in the pop-up window, type: adb commect 192.168.1.X:31015 (192.168.1.X is the IP address of your box, in the box On the network query, 31015 is the port of the box. Press Enter to display connected to 192.168.1.X:31015. This verifies that the connection was successful. Otherwise, you will need to find out the reason. After the connection is successful, enter adb install c:/es.apk (c:/es.apk indicates that the ES file manager software stores es as the file name on the C drive). After the installation is successful, insert the U disk into the box and use the box. The remote control board opens the ES file manager software on the box. Find the remote.conf remote control code file in the system\\ect folder of the box system under the ES file manager software and copy it to the U disk, and insert the U disk into the computer backup remote. Conf remote code to the computer for recovery. Disadvantages of the firmware: The remote control board setting key cannot be used, and the remote control board cannot be used to boot, and the mt7601 network card box cannot connect to WiFi (my box is the mt7601 network card version and there is no excessive box test). \u0026nbsp; This note should be applicable to Q5 devices in all regions. It describes the process in detail and provides it to those who need it. I am Guizhou Mobile. There are not so many equipments for testing. Please test it yourself in other areas. I am not responsible for the consequences. Brush is risky, and brush and cherish.

First, the preparation 1. Need tools: TTL line (recommended to buy CH340G models, more secure), U disk, USB male to male line; 2. Download Brush Wizard, Es File Manager software, putty software, TTL driver package, Burning_Tool flashing tool software, firmware (net disk there rtl8189, mt7601, rtl8188e three network adapters, multiple desktop versions, please note that choose to download, in theory, firmware support Zhejiang Mobile, Jiangsu Mobile, Guizhou Mobile original remote control). Backup box system method: 1. Prepare TTL line, U disk (formatted as FAT32 file system), putty software, TTL driver package.

2. Lightly open the box, wiring; box wiring method, directly look at the back of the back, GND then GND, RX then TX, TX then RX;

3. Install TTL line driver, we directly install the TTL model to find the corresponding driver to install (this tutorial link has provided CH340G usb to ttl driver support win7 driver); 4. Right-click my computer - properties - equipment Manager - Port - COM \u0026quot;X\u0026quot; (X is the last digit) - Properties - port settings - changed to '115200' - OK;

5 open putty, according to the order of the figure can be set, COM behind the number in accordance with their own computer digital input, set the completion of choice open, then the set-top box power on the box, this time putty will start running code (if not running code Align the RX and TX of the TTL line on the STB);

6. Back up the box system: After running the code, press the Enter key on the keyboard, enter the following command and press Enter. Dd if=/dev/block/mmcblk0pX of=/mnt/sda/sda1/system.img Description: if=original path of=target disk path+file name.

If the backup is successful, there will be a system.img file in the root directory of the U disk, about 600 M, backed up to the computer for future recovery. Backup remote code method: Install the Flash Wizard, click the Utility page, click the ADB command line button, in the pop-up window, type: adb commect 192.168.1.X:31015 (192.168.1.X is the IP address of your box, in the box On the network query, 31015 is the port of the box. Press Enter to display connected to 192.168.1.X:31015. This verifies that the connection was successful. Otherwise, you will need to find out the reason. After the connection is successful, enter adb install c:/es.apk (c:/es.apk indicates that the ES file manager software stores es as the file name on the C drive). After the installation is successful, insert the U disk into the box and use the box. The remote control board opens the ES file manager software on the box. Find the remote.conf remote control code file in the system\\ect folder of the box system under the ES file manager software and copy it to the U disk, and insert the U disk into the computer backup remote. Conf remote code to the computer for recovery.

Second, install the brush tool to install USB_S905 -S805 Brush tool Burning_Tool_v2.0.5.15-build9 (with license) Brush tool, before installing the best to exit all antivirus software, security guards software, installation, will prompt the installation of the driver, follow the prompts to complete the drive After installation and installation, copy the license folder from the package to the Burning Tool of the Brush Tool. Third, brush machine to open Burning_Tool software, use USB public to connect the box to the public computer, if the usb to connect the computer and the box, the software does not respond, please unplug the USB male to public line, remove the box short chip 29/30 feet (This The chip has 24 pins on one side and 48 pins on both sides (as shown below).

Use a small metal tool to short-circuit first then plug in the USB cable to the computer (it can't be released if you want to release it, but it will be mentioned later). If it is a desktop, it is better to plug in the USB port behind the host (the whole process can't take the box. Power) until the computer displays the installation driver. After the driver is successfully installed, click on the File menu, click on the import burning package, find the firmware you downloaded and open, click on the start button to brush, until the progress bar to windows 7 usb backup image% for half a second or one second When the clock is released, release the hand that shorts the pins of the chip 29 and 30. After that, free the hands until the instruction is successfully recorded. The original "start" button changes to "stop". Click the stop button to close the software and unplug the USB male connector. Public line, enjoy the TV. \u0026nbsp; If the remote control cannot be used after brushing the machine, temporarily use the mouse instead. Set the language, open the market directly on the box to download the file manager, insert the U disk, restore the remote.conf remote control code in the previous backup to the system\\ect under the box, and restart it (Note: use the RE file manager. When opened, the box system is read-only and needs to be read-only to read and write. Network disk contains specific tutorials.